Get up to date with the latest news and blogs!
BUILDRITE EPOXY PRIMER GRAY is a two-component polyamide cured epoxy coating designed for use in metal finishes, concrete, wood, or previously painted surfaces or as an immediate coat under light-colored topcoats.
a gallom conatiner's coverage depends on the area of application
BUILDRITE CLEVER SIL WHITE is a one-component, viscous, aliphatic polyurethane dispersion, which cures with the humidity in the atmosphere to produce a highly-elastic membrane with strong adhesion to many types of surfaces, which result in excellent mechanical, chemical, thermal, UV, and natural element resistance properties
5kg container can cover 3 sqm (2 coats)
- For roof decks and balconies that require a coating
- Easy to use
- UV & weather Resistant
- Superb elongation
- Excellent in tensile
- Anti-fracture, no blistering
- No reinforcement required
- No tar, no bitumen, non-toxic
BLOCKTITE RRC is a water-based coating specially formulated with 85% heat-shielding and excellent waterproofing qualities. It can reflect sunlight, significantly reducing the heat transfer in the roof of a building. Its insulation capability keeps the indoor temperature low, which reduces energy costs.
APPLICATION:
It can be applied using a brush, roller or spray gun.
SPREADING RATE:
Flat Roofs: 4.4 sq. meter/4-liters @ 500 microns dry film thickness
Pitched Roofs: 6 sqm/4-liters @370 microns dry film thickness
Walls(smooth): 8.8 sqm/4-liters @ 250 microns dry film thickness
DRYING TIME:
Approximately 4 hours. Allow 1 hour for each successive coating.
It is ideal for roofs and walls of residential or commercial buildings. It can be applied to may types of substrate, such as concrete, bricks, wood, steel, masonry, etc.
BUILDRITE CONFIX HV is the ideal choice for vertical bonding of new to old concrete.
7kg gal set can cover 10sqm per coat
As an Epoxy Adhesive:
- To bond old concrete to freshly poured concrete topping, thus eliminating “cold joints” between old and new concrete
- To replace cement in bonding pre-cast, concrete structural units such as concrete decors under damp or dry conditions
- To bond wood or metal to concrete surfaces such as anchoring machinery to a concrete floor
- To anchor and grout concrete or ceramic floor tiles over cement, wood or steel
As an Epoxy Mortar:
- To patch spalled and damaged areas in concrete structures
- To use as a tack coat or primer before pouring fresh concrete topping when bringing low areas to proper grade
- Tensile strength:
- 3,000 ± 500 PSI
- Flexural strength:
- 87,000 ± 500 PSI
- Compressive strength:
- 8,500 ± 500 PSI
BUILDRITE TOFIL 803 is a water-based primer and sealer for all types of masonry, concrete, bricks and dry wall. It is low odor, non-toxic, non-flammable, and has good sealing and adhesion ability with the substrate.
16L container can cover 80- 100 m2 per coat
- Interior and exterior walls (masonry, concrete, bricks and dry wall)
- Ready to use and easy application
- Good adhesion on Skimcoat and plaster finish
- Prevents efflorescence
- Cost and time saving
- Good hiding ability
a 20kg container's coverage depends on the area of application
BUILDRITE GRANITE POLYMER C2 is a white cementitious powder especially formulated to be mixed with water as tile adhesive with very good adhesion strength.
25kg bag can cover 6-7sqm at 2-3 thickness
- Both wall and floor
- Internal and external areas
- Ready and easy to use
- Vertical and horizontal application
- Non-sag properties
- Excellent bond to the concrete substrate
- Good open time
- Good slip resistance
EPOCOAT MORTAR SD is a three-component epoxy-based floor topping formulated from high-grade resins and curing agents, especially for flooring applications. It is a solvent-free combination of epoxy resin, amine hardener, and graded aggregates. It is in a pre-weighed unit which is ready for on-site mixing and application.
an 8-liter pack can cover 1.6 m2 at 5mm thickness
- Ideal for floor topping new and existing flooring of food processing plants, chemicals, pharmaceutical factories, sugar, and oil refineries.
- Chemical handling and process areas
- Patching of deteriorated flooring
- Durable, hard-wearing surface with excellent resistance to abrasion and a wide range of chemicals
- Good gripping surface to both pedestrian and vehicular traffic
- Long service life
- Easier to clean, resulting in low maintenance costs
BUILDRITE HARDCRETE 510 is a cementitious pre-packed repair mortar specially designed for resurfacing, patching, and repairing large areas of concrete at a minimum thickness of 10mm.
a 25kg bag's coverage depends on the area of application
- General patching repair work
- Patching and repairing of damaged concrete surfaces
- Resurfacing of worn out concrete floors
- Topping of new and old concrete floors
- Ideal repair works for driveways, warehouses, car parks, loading bays, concrete roads, etc.
- Recommended for a minimum thickness of 10mm.
- Pre-packed - easy to mix and apply
- Shrinkage compensated
- Special formulation accelerates strength development.
- Abrasion and weather resistant
- Excellent adhesion to concrete
Compressive Strength at 28 days: 5000 PSI
BUILDRITE EPOXY PRIMER WHITE is a two component polyamide cured epoxy coating designed for use in metal finishes, concrete, wood or previously painted surfaces or as an immediate coat under light-colored topcoats.
Gallon = Depends on the area of application