MAX BOND Marine Epoxy


MAX BOND Marine Epoxy is a two component epoxy system made of high grade epoxy and polyamide curing agents to ensure superior quality bonding applications. It is reinforced by metalloids (metal like minerals) for maximum impact resistance. The cured epoxy exhibits outstanding adhesive strength, mending capabilities with excellent impact and mechanical strength. It has excellent resistance against acids, alkalis, oils and salt water

all-purpose-epoxy-ft-01 all-purpose-epoxy-ft-02

Features & Benefits

  • Excellent bond to a wide variety of substrates.
  • Resistance to acids, alkalis and salt water.
  • Excellent impact and mechanical strength.

Areas of application

It can be used to fill hollows, voids and holes in concrete floors; sealing, caulking and construction of metal vessels, tankers and wooden boats.

How to Use

Surface Preparation

All surface to be bonded must be dry, firm, and free of oil, grease, rust, dust and other contaminants. All laitance should be removed mechanically. The use of compressed air is highly recommended for cleaning the dowel holes in order to obtain a clean and structurally sound surface.


Mix very well equal amount of Part A: adhesive and Part B: hardener until a uniform color is attained. Prepare enough amount to be used within the pot life of the product.


Using spatula or putty knife, apply to the properly prepared surface. Remove excess materials before it cures. Allow 24 hours curing time before the applied product is subject to stress.

Cleaning of tools

Tools and equipment should be cleaned immediately with MAX BOND Epoxy Reducer after use to remove excess resin and hardener. Cured epoxy can only be removed by mechanical grinding.

Physical properties

  • Mix ratio: 1 part by volume of Part A: adhesive; 1 part by volume of Part B: hardener
  • Kilograms per gal: Part A: adhesive : 6 +/- 0.2 kgs; Part B: hardener : 6 +/- 0.2 kgs
  • Full cure time: 24 hours
  • Abrasion resistance: excellent
  • Chemical resistance: Highly resistant to acids, alkalis, solvents, oil, salts
  • Adhesion: excellent
  • Impact: excellent

Health and Safety

  • Wear rubber or plastic gloves to avoid contact with skin. Use soap and water to remove the mixture from hands. Do not use strong solvents to remove mixture from skin.
  • MAX BOND Marine Purpose Epoxy is nonflammable.

Available Sizes

  • 1/4L
  • 1/2L
  • 1L
  • 1 gallon